Loading...
Serving Brentwood, CA and surrounding areas. (925) 532-0537
Your garage or living space deserves a floor that looks custom and holds up through Brentwood summers. Metallic epoxy gives you both - a one-of-a-kind finish that stays beautiful for years.
Metallic epoxy flooring in Brentwood is a thick, poured coating applied directly over your existing concrete slab, creating a glossy, three-dimensional finish with swirling metallic patterns. Most jobs take two to three days from surface prep to final topcoat, with a 72-hour curing window before you can park on the floor.
A lot of Brentwood homeowners come to us after years of looking at a bare, stained garage floor that never matched the rest of the house. Metallic epoxy fixes that in a weekend-plus. Because the metallic pigments swirl differently on every pour, your floor will look unlike any other in the neighborhood. If you are also exploring simpler options, our epoxy floor coatings page covers standard systems that work just as well for everyday garages.
The coating bonds to the concrete itself, so you are not adding something that can shift or peel the way paint does. When the prep work is done right, a metallic epoxy floor in Brentwood holds up through the summer heat and the dusty fall season without losing its finish.
Oil stains, rust marks, and a rough surface that is hard to sweep clean are all signs bare concrete has absorbed everything that landed on it. Bare concrete is porous by nature, and those stains only get harder to ignore. A metallic epoxy coating seals the surface completely and gives you something that actually wipes clean.
The inland valley heat in Brentwood puts concrete through significant expansion and contraction every year. If you see a network of fine surface cracks spreading across the floor, that is the concrete showing its age from those temperature swings. Minor surface cracking like this can be addressed before the epoxy goes down, and the finished floor will look completely smooth.
Bare concrete sheds a fine white powder called efflorescence as it slowly breaks down at the surface. If you notice white powder on stored items or track fine grit into the house regularly, your concrete is telling you it needs to be sealed. A properly applied epoxy coating stops that process entirely and keeps the dust out of your living space.
A painted or coated floor that is lifting at the edges or bubbling in patches means the original coating was not applied over properly prepared concrete. Peeling coatings are also a slip hazard. The right fix is to strip the old coating, grind the surface correctly, and start fresh - which is exactly what a quality metallic epoxy installation does.
Every metallic epoxy installation starts with mechanical surface preparation - grinding the concrete so the coating bonds at depth - followed by a base coat, a metallic pigment layer, and a protective clear topcoat. The look you get depends on the pigment color you choose and how the installer works the coating as it levels. Common choices include single-color metallic pours for a clean, uniform look, and multi-color blends that create deep, marbled patterns. If you want something even more understated, our urethane cement flooring is worth considering for a matte, industrial-grade surface.
Beyond the garage, metallic epoxy works well in home gyms, workshops, laundry rooms, and finished basement spaces. The coating is hard enough to handle vehicle traffic and resist household chemicals, so it fits a range of uses. Every job includes a final walkthrough with care instructions and a written warranty so you know exactly what is covered.
Suits homeowners who want a consistent, high-gloss look with subtle depth - a step up from standard epoxy without a busy pattern.
Suits homeowners who want a bold, marbled or lava-flow look with maximum visual impact in the space.
Suits driveways, shop floors, or any space where grip underfoot matters alongside aesthetics.
Suits slabs with existing damage - cracks are filled and stains addressed before the coating goes down for a smooth result.
Brentwood sits in the East Contra Costa inland valley, where summer temperatures regularly push past 95 degrees and sometimes top 110 degrees. That heat is hard on bare concrete - the expansion and contraction cycles crack surfaces and break down ordinary coatings over time. A properly installed metallic epoxy system, with the right base coat and topcoat chemistry, is built to handle those temperature swings. Experienced local contractors schedule summer pours for early morning starts to keep the surface temperature manageable and get the best bond. Brentwood is also surrounded by farmland and orchards, and seasonal agricultural dust can settle on a wet coating and permanently embed in the finish. Knowing when to close the garage door and when to pour is something a local crew learns through experience here.
A lot of Brentwood homes were built during the rapid growth of the early 2000s, which means many garage slabs are between 15 and 25 years old - old enough to show surface wear and minor cracking, but in good enough shape for a metallic epoxy installation to bond well. Neighbors in Oakley and Antioch deal with the same conditions, and we serve all of those communities with the same crew that works throughout East Contra Costa County every week.
Reach out by phone or the contact form and describe the space. We reply within one business day and schedule a free on-site visit - no charge, no obligation to book.
We measure the floor, check the concrete condition, and talk through color and finish options. You get a written estimate that spells out surface prep, crack repair, and all coating layers - so there are no surprises on the final invoice.
The crew grinds the concrete, fills any cracks, and applies the base coat, metallic pigment layer, and protective topcoat. This is the noisiest part of the job and takes most of the first two days.
The floor needs 72 hours to cure before vehicle traffic. After that, we walk through the finished space with you, cover basic care, and explain the warranty so you know exactly what is covered going forward.
Free on-site estimate, written quote, no pressure. We reply within one business day.
(925) 532-0537We grind every slab before any coating goes on. This is the step that determines whether a metallic epoxy floor lasts a decade or starts peeling within a year. We never acid-etch and call it done - the bond has to be mechanical, and our process reflects that on every project we take.
We work in Brentwood and the surrounding East Contra Costa communities regularly. We know to plan summer pours for early morning, when to close garage doors during curing to keep agricultural dust off a wet coating, and how local slabs from the early 2000s construction boom tend to behave. That local knowledge shows up in the finished result.
Every metallic epoxy installation we do comes with a written warranty covering delamination and peeling. If something goes wrong because of how the floor was installed - not from damage after the fact - we come back and fix it. You will have that in writing before the job starts.
All contractors working on California homes are required to hold a valid state license through the California Contractors State License Board. You can look up any contractor's license number in under a minute. We hold an active license, carry insurance, and pull permits when a project requires one.
When you put all of that together - real surface prep, local experience, a written warranty, and a verified license - you get a floor that holds up and a contractor who stands behind it. That is what we aim for on every Brentwood job.
A seamless, industrial-grade coating that bonds tightly to concrete and handles heat, moisture, and heavy use - ideal when you need durability over decorative finish.
Learn MoreA solid, high-performance protective coating for garages and commercial spaces - straightforward and tough without the metallic visual effects.
Learn MoreSpring and fall fill up fast in Contra Costa County - lock in your date before the best installation windows are gone.